Full Service ARC and CD Stud Welding Systems & Supplies
click for phone | Fax: (713) 691-3699
Capacitor Discharge (CD) stud welding systems use a small ignition tip at the base of the weld stud to produce an arc. Pressure applied during the arc forces the base of the weld stud into the molten metal and welds the stud in .003 seconds. This fast weld time produces very little heat and...
Read more »
Capacitor Discharge Studs are available in many different sizes, from a base diameter of a #2 stud up to 3/8" , and from a length of 1/4" up to 3". Standard material for CD Studs are: Low Carbon Copper Flashed Steel, Stainless Steel, Aluminum Alloy, and Brass. External threads adhere to the...
Read more »
Drawn arc stud welding systems weld fasteners by striking an arc, then lifting the fastener and then plunging the fastener into the molten material after a specified time.
These systems use a ceramic ferrule to contain the molten material or can use an inert gas as a shield. They can weld...
Read more »