Products by Hartlauer Bits

USAGE: Plastics, Wood & Aluminum The 65-000 series is Onsrud's single-flute all-purpose cutter. It was designed for machines that don't have a tool changer, as it alleviates the need to change bits when changing material. While it does route wood, plastic, and aluminum well, it is not better than...

USAGE: Plastic, Wood, & Aluminum Sheet THIS IS OUR MOST POPULAR router bit because it leaves a smooth edge, it's value and performance It is designed for routing plastic (mostly acrylic) but it cuts soft plastics, wood and sheet aluminum. It is why is has become an all-purpose router bits.

USAGE: Soft Plastic This series is excellent for routing soft plastics. The ridges on the back of this series are scalloped out rather than flat. This pushes the soft plastic in such a way that the material's edge doesn't scallop in like is common when routing with a standard single-edge spiral....

USAGE: Cast and Extruded Plastics This cutter is similar to the Onsrud 63-700 series. The manufacturer tweaked the design geometry to optimize this tool for cast or extruded acrylic. This cutter is designed to give a longer tool life and a smooth finish. If you have been using the Onsrud 63-700,...

USAGE: Hard Aluminum & Plastic These "O" fluted tools are designed for use at high speeds in metal cutting. This series is the recommended aluminum cutter. It will leave a smooth finish and does not require lubricating fluid. These tools are not designed for routing ferrous materials but will work...

USAGE:3003 Aluminums This cutter is for cutting soft aluminum 3003 series. Use of oil is needed to cut through this aluminum that heats up very fast and will start to melt into flukes.

USAGE: Natural Wood, Wood Composite & Solid Surface These tools are the most recommended wood cutters because they give good life, quality finish, and fast routing. The spiral flute helps with chip evacuation, especially when compared to Onsrud's 56-200 series. It is a solid carbide tool, which...

USAGE: Natural Wood & Wood Composite This is the go-to straight-edge woodcutter. The wedge design is optimized for routing in wood and wood composite. This cutter is especially effective in MDF and plywood. Because there is no upward pull, problems like blow-out can be avoided. These tools will...

USAGE: Foam Long lengths to cut through thick foams.

Our V-Cutter is the ultimate solution for precise "V" routing and edge beveling in plastic, wood, and aluminum applications. Designed to excel in a wide range of materials, this tool ensures clean, professional cuts that meet the demands of your industry. With carefully engineered angle...

Our Fly Cutter is the ideal tool for resurfacing spoil board materials, ensuring a smooth and precise finish for MDF, Sintra, and particleboard. Engineered for speed and efficiency, this cutter operates at lower spindle speeds (12,000–16,000 RPM) with high feed rates (200–400 IPM), making it...